Best for
- Brackets, mounts, and load-bearing fixtures
- Short-run mold inserts and thermoforming tools
- Thin-walled parts that need stiffness, not flex
Not the right choice for
- Parts that take an impact
- Parts that flex
About this resin family
Two grades: one with a polished-white finish for stiff parts, and our stiffest resin, for molds and tooling.
Key properties
| Stiffness (tensile modulus) | about 4.1 to 10 GPa |
|---|---|
| Tensile strength | about 65 to 69 MPa |
| Elongation at break | about 1 to 5.3% |
| Heat deflection (HDT) | about 77 to 163 C |
| Finish | white, matte or polished |