Best for
- Glove-box and pillar trim prototypes
- CMM inspection fixtures
- Gear check templates
Not the right choice for
- Outdoor parts in direct sun
- Loaded parts that run hot
- Contact with acetone or other strong solvents
- Food contact
Key properties
| Tensile strength | 25 to 42 MPa |
|---|---|
| Heat deflection | 87 to 106 C at 0.45 MPa, 84 to 101 C at 1.80 MPa |
| Water uptake | 0.35 to 0.65 percent in humid air |
What to use instead
- ASA when the part sees sunlight.
- Polycarbonate (PC) when the part has to hold its shape hotter than ABS can.
The FDM material selector narrows the whole range by operating temperature, load, chemical exposure, and budget.